Corrpro's Alcoke Vent Pipe

C$ C$
Options:
Alvent pipe

Due to the reaction of naturally occurring salt present in the soil with high current output deepwells, chlorine gases are produced and can cause significant damage to the coating of the cable terminating the anodes. This chemical attack can cause a cable break failure and result in the complete failure of the anode bed. With the use of Corrpo’s Alcoke vent pipe, the harmful gasses travel through the pipe instead and are dissipated into the atmosphere.

While mainly used for protection of the deepwell allowing harmful gases to escape, Corrpro’s Alcoke vent pipe also acts as a transportation method for water for the ground bed. In instances where the ground bed may have a lack of electrolytes present, water can be pumped into the vent pipe, allowing for the ground bed to be moistened, effectively changing the immediate circuit resistance of the anode to the soil.

 
Made using 1” (25.4mm) SCH/40 PVC pipe
Precision cut 0.006” slotted openings to allow gases to flow through pipe
Comes standard on 20ft (6m) sections
Available in standard pipe or with a Nilex fabric protective wrap
Can be produces in other diameters and lengths upon request
Corrpro’s Alcoke vent pipe is to be used with any high current output deepwell system. The vent pipe is the be installed in the section of the ground bed that the anodes are present to allow the collection of dangerous gases. In areas where the anodes are no longer present and only termination cables are present, the use of standard, non-slotted 1” SCH/40 PVC pipe is to be used.
When ordering Alcoke vent pipe, please indicate the length of vent pipe required, couplings and fittings required to complete the connection of the pipes, along with applicable primer and glue required. Also please indicate if a nilex fabric wrap will be required.

Web ID#: W/O Nilex – 54036645
Web ID#: /W Nilex – 54100993
 
 

800.826.7891

 

Corrpro U.S. Materials

11616 W 59th Street
Sand Springs, OK 74063

Ph: 918.245.8791
Fax: 918.245.8798

 

Corrpro Canada Materials & Corrpower Manufacturing

10848 – 214 Street N.W.
Edmonton, Alberta  T5S 2A7
Phone: 780.447.4565
Materials Inquiries: cpcaquotes@aegion.com