Test Station - Magnesium Anode
- Built with a test station head and industry standardized test station shunt
- Shunts available in 0.1, 0.01 and 0.001 Ohms
- Comes with a 5-foot mounting post and a 2-foot anchoring post.
- Analog ammeter also available to show anode bed’s current output
To be installed over top of the anode bed, the Anode Test Station helps monitor the effectiveness of the sacrificial cathodic protection system while also being an effective marker of where the anode bed was installed. A lead wire comes from the anode(s) and is attached to the shunt. From the other terminal of the shunt, a structure connection wire is connected onto the pipe or tank to complete the cathodic protection circuit. Using a True-RMS voltmeter, you can measure the voltage difference across the shunt and calculate the current being drawn from the anode bed.
Corrpro Technical Support
800.826.7891
Corrpro U.S. Materials
11616 W 59th Street
Sand Springs, OK 74063
Ph: 1.866.CORRPRO
Fax: 713.460.6060
Email: CorrproSales@aegion.com
Corrpro Canada Materials & Corrpower Manufacturing
10848 – 214 Street N.W.
Edmonton, Alberta T5S 2A7
Phone: 780.447.4565
cpcamaterials@aegion.com